Tornus/Frema Combinatus HQ500 HQ800
DESCRIPTIO PRODUCTI
Machina perutilis cum cochlea principali ad tornandum / fresandum / perforandum partes
2. Facilis mutatio instrumentorum a tornatione ad perforationem / fresaturam
3. Lectus rigidus machinae cum ducibus induratis et politis, laminis conicis ad adaptationes sine ictu
4. Fercula praecisionis magnam concentricitatem fusi praestant.
5. Machina fresatoria cum rotatione
| MODELLUM | HQ500/HQ800 | |
| VERSUS | Super lectum oscillare | 420mm |
| Distantia inter centra | 500mmHQ800:800mm | |
| Iter longitudinale maximum | 440mm (HQ800:740mm) | |
| Maxima transversa cursus | 200mm | |
| Conus fusi | MT4 | |
| Foramen fusi | φ28mm | |
| Gradus celeritatis fusi | 7 | |
| Ambitus celeritatis fusi | 160-1360 rpm | |
| Iter dolii | 70mm | |
| Attenuatio centri | MT3 | |
| Spatium filorum metricorum | 0.2-6mm | |
| Spatium filorum unciarum | 4-120T.PI | |
| Spatium longitudinale alimentationis automaticae | 0.05-0.35mm/0.002-0.014 | |
| Transversa series automaticae alimentationis | 0.05-0.35mm/0.002-0.014 | |
| PERFORATIO ET FRESATIO | Capacitas maxima perforationis | φ22mm |
| Magnitudo mensae laboris (L*W) | 475×160mm² | |
| Fresa extrema maxima | φ28mm | |
| Fresa frontalis maxima | φ80mm | |
| Distantia inter centrum fusi et columnam | 285mm | |
| Distantia inter fusum et mensam operariam | 306mm | |
| Iter capitis capitis sursum et deorsum | 110mm | |
| Conus fusi | MT3 | |
| Gradus celeritatis fusi | 16 | |
| Ambitus celeritatis fusi | 120-3000 rpm | |
| Gradus rotationis capitis scabellorum | ±360° | |
| MOTOR | Potentia motoris | 0.55 kW/0.55 kW |
| Tensio/Frequentia | Ut postulatio clientium | |
| DATA DE TRANSPORTATIONE | Magnitudo sarcinae | 1130 × 580 × 1100 mm (HQ800: 1430 × 580 × 1100 mm) |
| Pondus N/Pondus G | 245kg/280kg (HQ800: 275kg/325kg) | |
| Quantitas oneris | 40 frusta/20 receptacula (800: 32 frusta/20 receptacula) | |
